🎛️ Free acoustic configurator

Your studio sounds bad.
We'll tell you how to fix it.

Calculate in 2 minutes exactly what acoustic panels you need and where to place them. Free, no sign-up required.

Panels from €32 48-72h shipping Made in Spain

Why your studio doesn't sound the way it should

🔀

Mixes that sound different outside your studio

You add reverb to the mix, it sounds great in your room, but when you listen in the car or on headphones there's way too much. The problem isn't your ears — it's your room. Reflections are deceiving you.

📉

Bass that booms or disappears

Certain bass notes sound exaggerated while others vanish. That's because your room has resonant modes — frequencies that get amplified or cancelled depending on the room dimensions.

😴

You get tired quickly when producing

Working for hours in an untreated room fatigues your ears. Excessive reverberation makes your brain work twice as hard to separate direct sound from reflections. Treating your room is treating your main tool.

Professional acoustic treatment in 4 steps

No sound engineering degree needed. No waiting for quotes. No hassle.

1

Tell us about your room

Room type, dimensions, and construction materials. You just need a tape measure and 30 seconds.

2

Place your monitors

Drag your monitors and listening position on your room's floor plan. The configurator calculates reflections in real time.

3

Get your acoustic diagnosis

Room mode analysis, reverberation time by frequency, and exactly how many panels, bass traps and diffusers you need.

4

Visualise the result in 3D

See your treated room with panels placed in their exact positions. Rotate, explore, and when you're ready, place your order.

Professional acoustic treatment products

Made in Spain with high-density acoustic foam. Fire-rated. No middlemen.

Absorptive panel

Havsvåg Panel

950 × 950 × 50mm
FR28 Foam · NRC 0.80
From €32

Ideal for: First reflections · Ceiling · Side walls

Bass trap

Corner Bass Trap

300 × 300 × 600mm
ZH FR28 Foam · NRC 0.90
From €48

Ideal for: Corners · Bass control · Room modes

Diffuser

Optimised QRD Diffuser

600 × 600 × 130mm
High-density EPS · Paintable
From €64

Ideal for: Rear wall · Frequency dispersion

Not sure how many you need? → Use the configurator

The real impact of acoustic treatment

Example: 6 × 4 × 2.5m room treated with 8 panels + 4 bass traps

Treatment reduces reverberation time across all frequencies, especially in the bass range where room modes cause the most problems. The result: mixes that translate correctly to any playback system.

Why choose Frecuentia

🧠

Intelligent acoustic configurator

We don't sell panels blindly. Our configurator calculates exactly what you need based on your room. Others sell generic kits — we personalise every recommendation.

🇪🇸

Made in Spain

Our products are manufactured in Barcelona. No imports, no customs, no weeks of waiting. Shipping in 48-72 hours.

💰

Direct pricing, no middlemen

An equivalent panel from GIK Acoustics costs €80-120. From Vicoustic, €60-90. Our Havsvåg: €32. Same foam, same result.

🏠

Visualise before you buy

See your room in 3D with panels placed before spending a single euro. Nobody else in Spain offers this.

🔥

Certified materials

Self-extinguishing acoustic foam E-d0 (UNE-EN 13501-1). We don't sell uncertified Amazon foam.

🎧

Acoustic advice included

Got questions? Our team advises you for free. We're not a shop — we're acoustic specialists.

Frequently asked questions about acoustic treatment

Amazon pyramid foam absorbs some energy at mid and high frequencies, but does nothing below 500Hz. The real problems in a home studio (room modes, uncontrolled bass) sit between 50-300Hz. Our high-density foam panels (28 kg/m³) and bass traps are specifically designed for those frequencies. Amazon foam is typically 15-20 kg/m³ and 2-3cm thick — physically incapable of absorbing bass.

It depends on your room size, construction materials, and use case (production, recording, podcasting...). Our free configurator calculates the exact amount in 2 minutes. As a reference: a typical 10m² home studio needs 8-12 panels + 4 bass traps.

No. Panels are glued to the wall with acoustic adhesive or hung with included brackets. No drilling or construction work needed. Full installation for a home studio takes 1-2 hours. Our configurator gives you exact positions: just measure and stick.

No, they're very different things. Soundproofing (acoustic isolation) prevents sound from entering or leaving the room — it requires construction work, double walls, floating floors. Acoustic treatment (conditioning) improves how the room sounds inside — it's done with panels, bass traps and diffusers installed on existing surfaces. Frecuentia specialises in acoustic treatment, not soundproofing.

Yes. You have 14 days withdrawal right from delivery, in accordance with Spanish e-commerce legislation. Panels must be in their original condition.

Absorptive panels are available in anthracite and maroon. QRD diffusers are white and can be painted with water-based paints without losing acoustic performance.

Yes, we ship to mainland Spain. Please enquire for Balearic Islands, Canary Islands, Ceuta and Melilla.

What our customers say

★★★★★
I'd been mixing on headphones for months because my room sounded awful. With Frecuentia's configurator I knew exactly what to buy and where to put it. Now I mix on monitors and the mixes translate perfectly.
Carlos M. Home Studio · Madrid
★★★★★
The best part is the configurator. Other shops sell you a generic kit, here they calculated exactly what my 12m² room needed. I saved money because I didn't buy unnecessary panels.
Laura P. Podcast · Barcelona
★★★★★
I tried Amazon foam first. Complete waste of money, changed nothing in the bass. Frecuentia's panels and bass traps completely transformed my room. The before and after is brutal.
Javi R. Producer · Valencia

Your room can sound professional

The configurator is free, takes 2 minutes, and requires no sign-up. Discover exactly what treatment you need.

Analyse my room for free →
Analyse my room →